Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in East Riding of Yorkshire

We supply and fit FD90 and FD120 fire doors throughout East Riding of Yorkshire, including Hull, Bridlington and Beverley, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in East Riding of Yorkshire, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Certified FD90 and FD120 fire doors for East Riding of Yorkshire

Throughout East Riding of Yorkshire, including Hull, Bridlington and Beverley, we survey, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.

Which rules apply in East Riding of Yorkshire?

Fire doors in East Riding of Yorkshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Cost of FD90 and FD120 fire doors in East Riding of Yorkshire

Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for East Riding of Yorkshire are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Typical uses in East Riding of Yorkshire

Hull's port, industrial units and terraced housing sit alongside market towns such as Beverley and coastal resorts like Bridlington.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

What you get with each doorset

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can you fit just one door?

Yes — from a single door to a full building.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Are FD120 doors always steel?

Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.

Towns in East Riding of Yorkshire we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in East Riding of Yorkshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.