FD90 and FD120 fire doors in Newton Aycliffe: how we work
Getting FD90 and FD120 fire doors right in Newton Aycliffe means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Newton Aycliffe is about 7 miles from Darlington. Wherever your building is in DL5, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Newton Aycliffe?
Because Newton Aycliffe is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Newton Aycliffe
Guide prices for FD90 and FD120 fire doors in Newton Aycliffe run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD90 and FD120 fire doors are needed
In Newton Aycliffe, FD90 and FD120 fire doors are typically needed in separating walls with long ratings and generator rooms.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Newton Aycliffe: questions
Can you work around tenants or staff in Newton Aycliffe?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you work for landlords and managing agents in Newton Aycliffe?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Which rules do FD90 and FD120 fire doors in Newton Aycliffe need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Newton Aycliffe
- Bishop Auckland (5 miles)
- Darlington (7 miles)
- Stockton-on-Tees (11 miles)
- Durham (11 miles)
- Billingham (11 miles)
- Thornaby-on-Tees (12 miles)
Also available in Newton Aycliffe
- Steel Fire Doors in Newton Aycliffe
- Timber Fire Doorsets in Newton Aycliffe
- Riser & Service Cupboard Doors in Newton Aycliffe
- Fire Door Replacement in Newton Aycliffe
- FD30 Fire Doorsets in Newton Aycliffe
- Fire Doors for Homes in Newton Aycliffe
- Glazed Fire Doors in Newton Aycliffe
- Double & Leaf-and-a-Half Fire Doors in Newton Aycliffe
- FD90 & FD120 Doorsets across County Durham
- All fire doors in Newton Aycliffe