Certified FD90 and FD120 fire doors for Darlington
If your fire risk assessment in Darlington has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in DL1 are free and quotes are fixed and itemised.
Surveys in Darlington are booked around your access needs, and we cover the wider County Durham area too.
Which rules apply in Darlington?
New and replacement fire doors in Darlington are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Darlington
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Darlington are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Darlington
Transformer and switch rooms and separating walls with long ratings are among the most common settings for FD90 and FD120 fire doors, in Darlington as elsewhere.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Darlington property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD90 and FD120 fire doors in Darlington: questions
Can you work around tenants or staff in Darlington?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Darlington.
How quickly can you survey in Darlington?
We arrange surveys around your access needs and, where possible, combine Darlington visits with other work in County Durham. Tell us your preferred dates when you enquire.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Darlington
- Newton Aycliffe (7 miles)
- Stockton-on-Tees (10 miles)
- Thornaby-on-Tees (10 miles)
- Bishop Auckland (11 miles)
- Billingham (11 miles)
- Middlesbrough (13 miles)
Other products in Darlington
- Glazed Fire Doors in Darlington
- Stairwell & Escape Route Doors in Darlington
- Acoustic Fire Doors in Darlington
- Fire Door Ironmongery & Closers in Darlington
- Security Fire Doors in Darlington
- Fire Door Supply & Fit in Darlington
- Commercial & Office Fire Doors in Darlington
- FD30S Smoke Control Doorsets in Darlington
- FD90 & FD120 Doorsets across County Durham
- All fire doors in Darlington