FD90 & FD120 Doorsets for Durham buildings
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Durham, County Durham. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Our County Durham coverage includes Durham and its neighbours Chester-le-Street, Houghton-le-Spring and Stanley; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in County Durham
New and replacement fire doors in Durham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Durham
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Durham quote is fixed after survey and itemised door by door.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Durham include generator rooms and transformer and switch rooms.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Generator rooms
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Do you cover Durham?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Durham and the rest of County Durham, including DH1 and nearby Chester-le-Street.
Can you fit just one door in Durham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in County Durham.
Is the survey in Durham free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Durham
- Chester-le-Street (6 miles)
- Houghton-le-Spring (6 miles)
- Stanley (8 miles)
- Washington (9 miles)
- Bishop Auckland (9 miles)
- Peterlee (9 miles)
Also available in Durham
- Fire Exit Doors in Durham
- Steel Fire Doors in Durham
- Acoustic Fire Doors in Durham
- Glazed Fire Doors in Durham
- Stairwell & Escape Route Doors in Durham
- Flat Entrance Fire Doors in Durham
- HMO Fire Doors in Durham
- Security Fire Doors in Durham
- FD90 & FD120 Doorsets across County Durham
- All fire doors in Durham