Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Rugby

We supply and fit FD60 fire doors in Rugby (CV21) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Rugby, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 Fire Doorsets for Rugby buildings

Fire Rated Doors supplies and fits FD60 fire doors in Rugby, Warwickshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

Rugby is about 14 miles from Nuneaton; we cover both, along with Daventry, Coventry and Bedworth.

Regulations for FD60 fire doors in Warwickshire

Because Rugby is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Guide prices in Rugby

Our guide price for FD60 fire doors in Rugby is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Where FD60 fire doors are needed

Typical uses for FD60 fire doors in Rugby include stair cores in taller blocks and compartment walls.

Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.

  • Stair cores in taller blocks
  • Compartment walls
  • Higher-risk stores
  • Plant and boiler rooms

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Rugby.

Which rules do FD60 fire doors in Rugby need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you cover Rugby?

Yes. We survey, supply and fit FD60 fire doors throughout Rugby and the rest of Warwickshire, including CV21 and nearby Daventry.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

Also covering towns near Rugby

Other fire doors in Rugby

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.