Certified FD60 fire doors for Warwick
Getting FD60 fire doors right in Warwick means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover CV34 and the surrounding area, including Leamington Spa. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Warwick
Fire doors in Warwick sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD60 fire doors prices in Warwick
Our guide price for FD60 fire doors in Warwick is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are used in Warwick
Typical uses for FD60 fire doors in Warwick include compartment walls and higher-risk stores.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Warwick
Can you work around tenants or staff in Warwick?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD60 fire doors in Warwick need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you fit just one door in Warwick?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Warwickshire.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
- Leamington Spa (2 miles)
- Kenilworth (4 miles)
- Stratford-upon-Avon (8 miles)
- Coventry (9 miles)
- Solihull (12 miles)
- Shirley (13 miles)
Also available in Warwick
- Flat Entrance Fire Doors in Warwick
- Fire Door Ironmongery & Closers in Warwick
- Stairwell & Escape Route Doors in Warwick
- FD30 Fire Doorsets in Warwick
- School & Healthcare Fire Doors in Warwick
- HMO Fire Doors in Warwick
- Security Fire Doors in Warwick
- Timber Fire Doorsets in Warwick
- FD60 Fire Doorsets across Warwickshire
- All fire doors in Warwick