Certified FD60 fire doors for Nuneaton
Looking for FD60 fire doors in Nuneaton? Our supply and fit service covers CV11 and the surrounding area, including Bedworth and Hinckley. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Surveys in Nuneaton are booked around your access needs, and we cover the wider Warwickshire area too.
Regulations for FD60 fire doors in Warwickshire
New and replacement fire doors in Nuneaton are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Nuneaton?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Nuneaton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are needed
Typical uses for FD60 fire doors in Nuneaton include stair cores in taller blocks and compartment walls.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Stair cores in taller blocks
- Compartment walls
- Plant and boiler rooms
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Nuneaton: questions
Can you fit just one door in Nuneaton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Warwickshire.
Will I get certificates for the doors fitted in Nuneaton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD60 fire doors in Nuneaton need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Nuneaton
- Bedworth (3 miles)
- Hinckley (4 miles)
- Coventry (8 miles)
- Tamworth (12 miles)
- Kenilworth (13 miles)
- Rugby (14 miles)
More doorsets for Nuneaton
- Fire Door Supply & Fit in Nuneaton
- Timber Fire Doorsets in Nuneaton
- Communal & Corridor Fire Doors in Nuneaton
- Riser & Service Cupboard Doors in Nuneaton
- Steel Fire Doors in Nuneaton
- School & Healthcare Fire Doors in Nuneaton
- HMO Fire Doors in Nuneaton
- FD90 & FD120 Doorsets in Nuneaton
- FD60 Fire Doorsets across Warwickshire
- All fire doors in Nuneaton