Certified FD90 and FD120 fire doors for Coventry
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Coventry, West Midlands. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover CV1 and the surrounding area, including Kenilworth. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Coventry?
New and replacement fire doors in Coventry are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD90 and FD120 fire doors prices in Coventry
Guide prices for FD90 and FD120 fire doors in Coventry run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are needed
Separating walls with long ratings and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Coventry as elsewhere.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Is the survey in Coventry free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Coventry.
Will I get certificates for the doors fitted in Coventry?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Coventry
- Kenilworth (5 miles)
- Bedworth (6 miles)
- Nuneaton (8 miles)
- Leamington Spa (9 miles)
- Warwick (9 miles)
- Rugby (11 miles)
Other fire doors in Coventry
- FD30 Fire Doorsets in Coventry
- Flat Entrance Fire Doors in Coventry
- Acoustic Fire Doors in Coventry
- Fire Exit Doors in Coventry
- FD60 Fire Doorsets in Coventry
- FD30S Smoke Control Doorsets in Coventry
- Security Fire Doors in Coventry
- HMO Fire Doors in Coventry
- FD90 & FD120 Doorsets across West Midlands
- All fire doors in Coventry