Getting FD60 fire doors fitted in Kenilworth
We fit FD60 doorsets for compartment walls, cores and plant rooms in Kenilworth and the rest of Warwickshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Warwickshire coverage includes Kenilworth and its neighbours Warwick, Coventry and Leamington Spa; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Kenilworth
New and replacement fire doors in Kenilworth are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Kenilworth?
Our guide price for FD60 fire doors in Kenilworth is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Kenilworth
Stair cores in taller blocks and higher-risk stores are among the most common settings for FD60 fire doors, in Kenilworth as elsewhere.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Kenilworth
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Which rules do FD60 fire doors in Kenilworth need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Kenilworth?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door in Kenilworth?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Warwickshire.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Kenilworth
- Warwick (4 miles)
- Coventry (5 miles)
- Leamington Spa (5 miles)
- Solihull (9 miles)
- Bedworth (10 miles)
- Shirley (11 miles)
Other fire doors in Kenilworth
- Fire Door Ironmongery & Closers in Kenilworth
- Composite Fire Doors in Kenilworth
- Fire Door Supply & Fit in Kenilworth
- Flat Entrance Fire Doors in Kenilworth
- Riser & Service Cupboard Doors in Kenilworth
- FD30 Fire Doorsets in Kenilworth
- Communal & Corridor Fire Doors in Kenilworth
- FD30S Smoke Control Doorsets in Kenilworth
- FD60 Fire Doorsets across Warwickshire
- All fire doors in Kenilworth