FD60 Fire Doorsets for Bedworth buildings
Getting FD60 fire doors right in Bedworth means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Bedworth is about 3 miles from Nuneaton. Wherever your building is in CV12, we arrange survey and fitting dates around access and occupancy.
What the law says in Bedworth
Fire doors in Bedworth sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD60 fire doors prices in Bedworth
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Bedworth quote is fixed after survey and itemised door by door.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are needed
Wherever they are in Bedworth, FD60 fire doors are most often specified for compartment walls and higher-risk stores.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Bedworth property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Warwickshire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Bedworth.
What does a Bedworth quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you cover Bedworth?
Yes. We survey, supply and fit FD60 fire doors throughout Bedworth and the rest of Warwickshire, including CV12 and nearby Nuneaton.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Bedworth
- Nuneaton (3 miles)
- Coventry (6 miles)
- Hinckley (6 miles)
- Kenilworth (10 miles)
- Rugby (11 miles)
- Leamington Spa (14 miles)
Also available in Bedworth
- Fire Doors for Homes in Bedworth
- Steel Fire Doors in Bedworth
- FD30 Fire Doorsets in Bedworth
- Fire Door Replacement in Bedworth
- Double & Leaf-and-a-Half Fire Doors in Bedworth
- Timber Fire Doorsets in Bedworth
- Composite Fire Doors in Bedworth
- Commercial & Office Fire Doors in Bedworth
- FD60 Fire Doorsets across Warwickshire
- All fire doors in Bedworth