FD30 Fire Doorsets for Staffordshire buildings
We supply and fit FD30 fire doors across Staffordshire, including Stoke-on-Trent, Newcastle-under-Lyme and Burton upon Trent. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
What the law says in Staffordshire
Because Staffordshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD30 fire doors cost in Staffordshire?
Budget around £750 to £1,150 per single doorset for FD30 fire doors supplied and fitted in Staffordshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD30 fire doors are used in Staffordshire
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Staffordshire
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD30 fire doors in Staffordshire
Can you fit just one door?
Yes — from a single door to a full building.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules apply in Staffordshire?
Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is FD30 the same as E30?
Broadly, yes. FD30 comes from the British test (BS 476-22); E30 is the European classification from BS EN 1634-1. Both mean 30 minutes of integrity. EI30 adds insulation, which some locations and glazed doors need.
Towns in Staffordshire we cover for FD30 fire doors
- Burntwood
- Burton upon Trent
- Cannock
- Kidsgrove
- Lichfield
- Longton
- Newcastle-under-Lyme
- Rugeley
- Stafford
- Stoke-on-Trent
- Tamworth
FD30 Fire Doorsets in neighbouring areas
Other fire doors in Staffordshire
- FD30S Smoke Control Doorsets in Staffordshire
- FD60 Fire Doorsets in Staffordshire
- FD90 & FD120 Doorsets in Staffordshire
- Flat Entrance Fire Doors in Staffordshire
- Communal & Corridor Fire Doors in Staffordshire
- Stairwell & Escape Route Doors in Staffordshire
- HMO Fire Doors in Staffordshire
- Fire Doors for Homes in Staffordshire
- Riser & Service Cupboard Doors in Staffordshire
- Commercial & Office Fire Doors in Staffordshire
- School & Healthcare Fire Doors in Staffordshire
- Timber Fire Doorsets in Staffordshire
- Composite Fire Doors in Staffordshire
- Steel Fire Doors in Staffordshire
- Glazed Fire Doors in Staffordshire
- Double & Leaf-and-a-Half Fire Doors in Staffordshire
- Fire-Rated Screens & Fanlights in Staffordshire
- Acoustic Fire Doors in Staffordshire
- Security Fire Doors in Staffordshire
- Fire Exit Doors in Staffordshire
- Fire Door Ironmongery & Closers in Staffordshire
- Fire Door Replacement in Staffordshire
- Fire Door Supply & Fit in Staffordshire
- All fire doors in Staffordshire