Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Staffordshire

We supply and fit FD30S fire doors throughout Staffordshire, including Stoke-on-Trent, Newcastle-under-Lyme and Burton upon Trent, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in Staffordshire, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Staffordshire

Across Staffordshire we handle FD30S fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

Regulations for FD30S fire doors in Staffordshire

Fire doors in Staffordshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

What do FD30S fire doors cost in Staffordshire?

Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Staffordshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD30S fire doors are needed

Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

What you get with each doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Staffordshire

Which rules apply in Staffordshire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

How quickly can you survey in Staffordshire?

We arrange surveys around your access needs and, where possible, combine visits with other work in Staffordshire. Tell us your preferred dates when you enquire.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What is the difference between FD30 and FD30S?

Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.

Towns in Staffordshire we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in Staffordshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.