Getting FD60 fire doors fitted in Stoke-on-Trent
Looking for FD60 fire doors in Stoke-on-Trent? Our supply and fit service covers ST4 and the surrounding area, including Newcastle-under-Lyme and Longton. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Stoke-on-Trent is one of the main towns we cover in Staffordshire; tell us your dates and we'll arrange a survey.
Which rules apply in Stoke-on-Trent?
Fire doors in Stoke-on-Trent sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Stoke-on-Trent
Our guide price for FD60 fire doors in Stoke-on-Trent is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Stoke-on-Trent
Typical uses for FD60 fire doors in Stoke-on-Trent include stair cores in taller blocks and plant and boiler rooms.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Stoke-on-Trent: questions
Will I get certificates for the doors fitted in Stoke-on-Trent?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Stoke-on-Trent quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stoke-on-Trent.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
FD60 Fire Doorsets near Stoke-on-Trent
- Newcastle-under-Lyme (2 miles)
- Longton (2 miles)
- Kidsgrove (6 miles)
- Congleton (11 miles)
- Crewe (12 miles)
- Stafford (14 miles)
Also available in Stoke-on-Trent
- Fire Door Ironmongery & Closers in Stoke-on-Trent
- HMO Fire Doors in Stoke-on-Trent
- Glazed Fire Doors in Stoke-on-Trent
- Fire Door Supply & Fit in Stoke-on-Trent
- Composite Fire Doors in Stoke-on-Trent
- Acoustic Fire Doors in Stoke-on-Trent
- School & Healthcare Fire Doors in Stoke-on-Trent
- FD30 Fire Doorsets in Stoke-on-Trent
- FD60 Fire Doorsets across Staffordshire
- All fire doors in Stoke-on-Trent