FD60 fire doors in Rugeley: how we work
For landlords, managing agents, businesses and homeowners in Rugeley, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Our Staffordshire coverage includes Rugeley and its neighbours Burntwood, Cannock and Lichfield; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Rugeley?
Fire doors in Rugeley sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Staffordshire
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Rugeley are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are used in Rugeley
Typical uses for FD60 fire doors in Rugeley include plant and boiler rooms and stair cores in taller blocks.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Rugeley quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you cover Rugeley?
Yes. We survey, supply and fit FD60 fire doors throughout Rugeley and the rest of Staffordshire, including WS15 and nearby Burntwood.
How quickly can you survey in Rugeley?
We arrange surveys around your access needs and, where possible, combine Rugeley visits with other work in Staffordshire. Tell us your preferred dates when you enquire.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Rugeley
- Burntwood (6 miles)
- Cannock (6 miles)
- Lichfield (7 miles)
- Stafford (8 miles)
- Bloxwich (10 miles)
- Aldridge (11 miles)
Also available in Rugeley
- FD30 Fire Doorsets in Rugeley
- Fire Exit Doors in Rugeley
- Steel Fire Doors in Rugeley
- Stairwell & Escape Route Doors in Rugeley
- Composite Fire Doors in Rugeley
- Security Fire Doors in Rugeley
- Fire Door Ironmongery & Closers in Rugeley
- Commercial & Office Fire Doors in Rugeley
- FD60 Fire Doorsets across Staffordshire
- All fire doors in Rugeley