Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in East Sussex

We supply and fit FD30S fire doors throughout East Sussex, including Brighton, Eastbourne and Hastings, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in East Sussex, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S Smoke Control Doorsets for East Sussex buildings

We supply and fit FD30S fire doors across East Sussex, including Brighton, Eastbourne and Hastings. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Regulations for FD30S fire doors in East Sussex

New and replacement fire doors in East Sussex are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

What do FD30S fire doors cost in East Sussex?

Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your East Sussex quote is fixed after survey and itemised door by door.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD30S fire doors are needed

Brighton and Hove's converted Regency and Victorian houses make it one of England's biggest HMO and flat-conversion markets; Eastbourne and Hastings add hotels and care homes.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

FD30S Smoke Control Doorsets: key specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Tell us about the doors — photos help
  2. Free measure survey at your East Sussex property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Common questions in East Sussex

Can you fit just one door?

Yes — from a single door to a full building.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules apply in East Sussex?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

Towns in East Sussex we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in East Sussex

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.