FD30S fire doors in Bexhill-on-Sea

Getting FD30S fire doors fitted in Bexhill-on-Sea

Looking for FD30S fire doors in Bexhill-on-Sea? Our supply and fit service covers TN40 and the surrounding area, including Hastings and Hailsham. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

Whether your building is in central Bexhill-on-Sea or on its edges towards Hastings, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

What the law says in Bexhill-on-Sea

New and replacement fire doors in Bexhill-on-Sea are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Cost of FD30S fire doors in East Sussex

Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Bexhill-on-Sea are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD30S fire doors

Wherever they are in Bexhill-on-Sea, FD30S fire doors are most often specified for cross-corridor doors and integral garage doors.

Brighton and Hove's converted Regency and Victorian houses make it one of England's biggest HMO and flat-conversion markets; Eastbourne and Hastings add hotels and care homes.

Cross-corridor doors
Integral garage doors
Protected stairways
Lobby doors in blocks of flats

Doorset specification

Fire resistance	30 minutes (FD30 / E30)
Smoke control	Tested to BS 476-31.1 or BS EN 1634-3 (Sa)
Seals	Combined intumescent and brush or blade smoke seal
Typical use	Flat entrances, protected stairs, corridor doors
Closer	Overhead or concealed closer to BS EN 1154

Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

Send your postcode, door count and any fire risk assessment notes
We survey and measure each opening for free
You get a fixed, itemised quote with certificate references
We fit, test operation and hand over the paperwork

Questions about FD30S fire doors in Bexhill-on-Sea

Will I get certificates for the doors fitted in Bexhill-on-Sea?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff in Bexhill-on-Sea?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Is the survey in Bexhill-on-Sea free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

FD30S Smoke Control Doorsets in Bexhill-on-Sea