Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in West Sussex

We supply and fit FD30S fire doors throughout West Sussex, including Crawley, Worthing and Bognor Regis, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in West Sussex, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S Smoke Control Doorsets for West Sussex buildings

We supply and fit FD30S fire doors across West Sussex, including Crawley, Worthing and Bognor Regis. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

What the law says in West Sussex

Fire doors in West Sussex sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Guide prices in West Sussex

Our guide price for FD30S fire doors in West Sussex is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Buildings that need FD30S fire doors

West Sussex combines Crawley's offices and Gatwick-related industry with coastal towns' care homes, hotels and converted houses.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

What's in the doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in West Sussex

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can you fit just one door?

Yes — from a single door to a full building.

Which rules apply in West Sussex?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

Towns in West Sussex we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in West Sussex

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.