Getting FD30S fire doors fitted in Seaford
Getting FD30S fire doors right in Seaford means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Seaford is about 11 miles from Brighton. Wherever your building is in BN25, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Seaford?
Because Seaford is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD30S fire doors cost in Seaford?
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Seaford are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD30S fire doors
Wherever they are in Seaford, FD30S fire doors are most often specified for integral garage doors and lobby doors in blocks of flats.
Brighton and Hove's converted Regency and Victorian houses make it one of England's biggest HMO and flat-conversion markets; Eastbourne and Hastings add hotels and care homes.
- Integral garage doors
- Lobby doors in blocks of flats
- Protected stairways
- Cross-corridor doors
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Seaford.
Will I get certificates for the doors fitted in Seaford?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Seaford?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Also covering towns near Seaford
- Rottingdean (7 miles)
- Eastbourne (8 miles)
- Hailsham (9 miles)
- Brighton (11 miles)
- Hove (12 miles)
- Portslade (15 miles)
Other products in Seaford
- Security Fire Doors in Seaford
- Fire Doors for Homes in Seaford
- Flat Entrance Fire Doors in Seaford
- HMO Fire Doors in Seaford
- Fire-Rated Screens & Fanlights in Seaford
- Glazed Fire Doors in Seaford
- Riser & Service Cupboard Doors in Seaford
- Commercial & Office Fire Doors in Seaford
- FD30S Smoke Control Doorsets across East Sussex
- All fire doors in Seaford