Certified FD30 fire doors for Warwickshire
Across Warwickshire we handle FD30 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
What the law says in Warwickshire
New and replacement fire doors in Warwickshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30 fire doors in Warwickshire
Our guide price for FD30 fire doors in Warwickshire is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD30 fire doors
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30 fire doors in Warwickshire
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
How quickly can you survey in Warwickshire?
We arrange surveys around your access needs and, where possible, combine visits with other work in Warwickshire. Tell us your preferred dates when you enquire.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Towns in Warwickshire we cover for FD30 fire doors
FD30 Fire Doorsets in neighbouring areas
Other fire doors in Warwickshire
- FD30S Smoke Control Doorsets in Warwickshire
- FD60 Fire Doorsets in Warwickshire
- FD90 & FD120 Doorsets in Warwickshire
- Flat Entrance Fire Doors in Warwickshire
- Communal & Corridor Fire Doors in Warwickshire
- Stairwell & Escape Route Doors in Warwickshire
- HMO Fire Doors in Warwickshire
- Fire Doors for Homes in Warwickshire
- Riser & Service Cupboard Doors in Warwickshire
- Commercial & Office Fire Doors in Warwickshire
- School & Healthcare Fire Doors in Warwickshire
- Timber Fire Doorsets in Warwickshire
- Composite Fire Doors in Warwickshire
- Steel Fire Doors in Warwickshire
- Glazed Fire Doors in Warwickshire
- Double & Leaf-and-a-Half Fire Doors in Warwickshire
- Fire-Rated Screens & Fanlights in Warwickshire
- Acoustic Fire Doors in Warwickshire
- Security Fire Doors in Warwickshire
- Fire Exit Doors in Warwickshire
- Fire Door Ironmongery & Closers in Warwickshire
- Fire Door Replacement in Warwickshire
- Fire Door Supply & Fit in Warwickshire
- All fire doors in Warwickshire