Getting FD30 fire doors fitted in Newcastle-under-Lyme
Fire Rated Doors supplies and fits FD30 fire doors in Newcastle-under-Lyme, Staffordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Newcastle-under-Lyme is about 2 miles from Stoke-on-Trent; we cover both, along with Stoke-on-Trent, Longton and Kidsgrove.
Fire door rules in Newcastle-under-Lyme
Fire doors in Newcastle-under-Lyme sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Newcastle-under-Lyme
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Newcastle-under-Lyme quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD30 fire doors are used in Newcastle-under-Lyme
Wherever they are in Newcastle-under-Lyme, FD30 fire doors are most often specified for offices and retail back-of-house and plant rooms and stores.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Offices and retail back-of-house
- Plant rooms and stores
- HMO bedrooms and kitchens
- Hotel corridors
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD30 fire doors in Newcastle-under-Lyme: questions
Can you fit just one door in Newcastle-under-Lyme?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Staffordshire.
Will I get certificates for the doors fitted in Newcastle-under-Lyme?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff in Newcastle-under-Lyme?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Neighbouring areas
- Stoke-on-Trent (2 miles)
- Longton (4 miles)
- Kidsgrove (6 miles)
- Crewe (11 miles)
- Congleton (11 miles)
- Stafford (14 miles)
Other fire doors in Newcastle-under-Lyme
- Glazed Fire Doors in Newcastle-under-Lyme
- Commercial & Office Fire Doors in Newcastle-under-Lyme
- Fire Exit Doors in Newcastle-under-Lyme
- Acoustic Fire Doors in Newcastle-under-Lyme
- FD30S Smoke Control Doorsets in Newcastle-under-Lyme
- Fire-Rated Screens & Fanlights in Newcastle-under-Lyme
- School & Healthcare Fire Doors in Newcastle-under-Lyme
- Fire Door Ironmongery & Closers in Newcastle-under-Lyme
- FD30 Fire Doorsets across Staffordshire
- All fire doors in Newcastle-under-Lyme