Our Derbyshire supply and fit service
Throughout Derbyshire, including Derby, Chesterfield and Long Eaton, we survey, quote and fit FD30 doorsets for flats, offices, HMOs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.
Fire door rules in Derbyshire
Fire doors in Derbyshire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD30 fire doors in Derbyshire
Our guide price for FD30 fire doors in Derbyshire is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD30 fire doors
Derbyshire combines Derby's industrial and city-centre buildings with market towns, mill conversions and rural care settings.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD30 fire doors in Derbyshire: questions
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules apply in Derbyshire?
Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Towns in Derbyshire we cover for FD30 fire doors
FD30 Fire Doorsets in neighbouring areas
Other fire doors in Derbyshire
- FD30S Smoke Control Doorsets in Derbyshire
- FD60 Fire Doorsets in Derbyshire
- FD90 & FD120 Doorsets in Derbyshire
- Flat Entrance Fire Doors in Derbyshire
- Communal & Corridor Fire Doors in Derbyshire
- Stairwell & Escape Route Doors in Derbyshire
- HMO Fire Doors in Derbyshire
- Fire Doors for Homes in Derbyshire
- Riser & Service Cupboard Doors in Derbyshire
- Commercial & Office Fire Doors in Derbyshire
- School & Healthcare Fire Doors in Derbyshire
- Timber Fire Doorsets in Derbyshire
- Composite Fire Doors in Derbyshire
- Steel Fire Doors in Derbyshire
- Glazed Fire Doors in Derbyshire
- Double & Leaf-and-a-Half Fire Doors in Derbyshire
- Fire-Rated Screens & Fanlights in Derbyshire
- Acoustic Fire Doors in Derbyshire
- Security Fire Doors in Derbyshire
- Fire Exit Doors in Derbyshire
- Fire Door Ironmongery & Closers in Derbyshire
- Fire Door Replacement in Derbyshire
- Fire Door Supply & Fit in Derbyshire
- All fire doors in Derbyshire