Certified FD30 fire doors for Stafford
We cover Stafford and nearby Rugeley for FD30 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Our Staffordshire coverage includes Stafford and its neighbours Rugeley, Cannock and Burntwood; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Stafford?
Fire doors in Stafford sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD30 fire doors in Staffordshire
Guide prices for FD30 fire doors in Stafford run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD30 fire doors are used in Stafford
In Stafford, FD30 fire doors are typically needed in offices and retail back-of-house and plant rooms and stores.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Offices and retail back-of-house
- Plant rooms and stores
- HMO bedrooms and kitchens
- Hotel corridors
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD30 fire doors in Stafford: questions
What does a Stafford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Stafford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Staffordshire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Stafford.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Also covering towns near Stafford
- Rugeley (8 miles)
- Cannock (9 miles)
- Burntwood (12 miles)
- Longton (12 miles)
- Bloxwich (14 miles)
- Stoke-on-Trent (14 miles)
More doorsets for Stafford
- Riser & Service Cupboard Doors in Stafford
- Composite Fire Doors in Stafford
- Fire Door Replacement in Stafford
- Glazed Fire Doors in Stafford
- FD60 Fire Doorsets in Stafford
- FD30S Smoke Control Doorsets in Stafford
- HMO Fire Doors in Stafford
- Fire Exit Doors in Stafford
- FD30 Fire Doorsets across Staffordshire
- All fire doors in Stafford