FD30 fire doors in Longton: how we work
Getting FD30 fire doors right in Longton means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Staffordshire coverage includes Longton and its neighbours Stoke-on-Trent, Newcastle-under-Lyme and Kidsgrove; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD30 fire doors in Staffordshire
New and replacement fire doors in Longton are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD30 fire doors prices in Longton
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Longton are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are used in Longton
Wherever they are in Longton, FD30 fire doors are most often specified for HMO bedrooms and kitchens and offices and retail back-of-house.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- HMO bedrooms and kitchens
- Offices and retail back-of-house
- Plant rooms and stores
- Hotel corridors
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Longton
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Staffordshire
Will I get certificates for the doors fitted in Longton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD30 fire doors in Longton need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Longton.
Does an FD30 door need a self-closer?
Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.
Nearby towns we cover
- Stoke-on-Trent (2 miles)
- Newcastle-under-Lyme (4 miles)
- Kidsgrove (8 miles)
- Stafford (12 miles)
- Congleton (13 miles)
- Crewe (15 miles)
Other products in Longton
- Fire Doors for Homes in Longton
- Double & Leaf-and-a-Half Fire Doors in Longton
- Fire Door Supply & Fit in Longton
- FD30S Smoke Control Doorsets in Longton
- Fire Door Replacement in Longton
- Fire Door Ironmongery & Closers in Longton
- FD60 Fire Doorsets in Longton
- Flat Entrance Fire Doors in Longton
- FD30 Fire Doorsets across Staffordshire
- All fire doors in Longton