Getting fire door closers and ironmongery fitted in York
We cover York and nearby Selby for fire door closers and ironmongery, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover York and the rest of North Yorkshire, with surveys arranged around your building's access and occupancy.
Regulations for fire door closers and ironmongery in North Yorkshire
Fire doors in York sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do fire door closers and ironmongery cost in York?
Guide prices for fire door closers and ironmongery in York run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are used in York
Access control preparation and failed closers and hinges are among the most common settings for fire door closers and ironmongery, in York as elsewhere.
North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.
- Access control preparation
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in York
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in York
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in York.
Can you fit just one door in York?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in North Yorkshire.
What does a York quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Neighbouring areas
- Selby (12 miles)
- Harrogate (19 miles)
- Goole (19 miles)
- Castleford (20 miles)
- Pontefract (20 miles)
- Leeds (22 miles)
More doorsets for York
- Communal & Corridor Fire Doors in York
- Composite Fire Doors in York
- Timber Fire Doorsets in York
- Steel Fire Doors in York
- FD90 & FD120 Doorsets in York
- Stairwell & Escape Route Doors in York
- Acoustic Fire Doors in York
- School & Healthcare Fire Doors in York
- Fire Door Ironmongery & Closers across North Yorkshire
- All fire doors in York