Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
BS EN 1154BS EN 1935BS EN 1155

Fire Door Ironmongery & Closers in East Riding of Yorkshire

We supply and fit fire door closers and ironmongery throughout East Riding of Yorkshire, including Hull, Bridlington and Beverley, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £120 per item in East Riding of Yorkshire, supplied & fitted, ex VAT

Overhead door closer fitted to a white fire door and frame

Fire Door Ironmongery & Closers for East Riding of Yorkshire buildings

We supply and fit fire door closers and ironmongery across East Riding of Yorkshire, including Hull, Bridlington and Beverley. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Which rules apply in East Riding of Yorkshire?

Because East Riding of Yorkshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of fire door closers and ironmongery in East Riding of Yorkshire

Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your East Riding of Yorkshire quote is fixed after survey and itemised door by door.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where fire door closers and ironmongery are used in East Riding of Yorkshire

Hull's port, industrial units and terraced housing sit alongside market towns such as Beverley and coastal resorts like Bridlington.

  • Failed closers and hinges
  • Busy corridors needing hold-open
  • Seal and signage replacement
  • Access control preparation

Fire Door Ironmongery & Closers: key specification

ClosersOverhead and concealed closers to BS EN 1154
HingesCE/UKCA-marked butt hinges to BS EN 1935
Hold-openElectromagnetic and free-swing devices to BS EN 1155
Locks & latchesTo BS EN 12209, tested with the doorset
Seals & signsIntumescent and smoke seals; mandatory fire door signage
Elevation drawing of fire door ironmongery & closers

See the full specification and options for Fire Door Ironmongery & Closers

From enquiry to handover

  1. Tell us about the doors — photos help
  2. Free measure survey at your East Riding of Yorkshire property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Common questions in East Riding of Yorkshire

Which rules apply in East Riding of Yorkshire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Can you fit just one door?

Yes — from a single door to a full building.

Can I use any hinge on a fire door?

No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.

Towns in East Riding of Yorkshire we cover for fire door closers and ironmongery

Fire Door Ironmongery & Closers in neighbouring areas

Other fire doors in East Riding of Yorkshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.