Our Middlesbrough supply and fit service
Need fire door closers and ironmongery in Middlesbrough? We supply and fit complete certified doorsets across North Yorkshire, starting with a free measure survey in and around TS1. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Middlesbrough is about 43 miles from York; we cover both, along with Billingham, Stockton-on-Tees and Thornaby-on-Tees.
What the law says in Middlesbrough
Because Middlesbrough is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Middlesbrough
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Middlesbrough are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Middlesbrough
In Middlesbrough, fire door closers and ironmongery are typically needed in failed closers and hinges and seal and signage replacement.
North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Middlesbrough
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Middlesbrough.
Which rules do fire door closers and ironmongery in Middlesbrough need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Middlesbrough quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Middlesbrough
- Billingham (2 miles)
- Stockton-on-Tees (3 miles)
- Thornaby-on-Tees (4 miles)
- Redcar (7 miles)
- Hartlepool (7 miles)
- Darlington (13 miles)
Other fire doors in Middlesbrough
- Flat Entrance Fire Doors in Middlesbrough
- Fire-Rated Screens & Fanlights in Middlesbrough
- Timber Fire Doorsets in Middlesbrough
- Fire Door Replacement in Middlesbrough
- School & Healthcare Fire Doors in Middlesbrough
- HMO Fire Doors in Middlesbrough
- FD60 Fire Doorsets in Middlesbrough
- FD30S Smoke Control Doorsets in Middlesbrough
- Fire Door Ironmongery & Closers across North Yorkshire
- All fire doors in Middlesbrough