Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
PAS 24LPS 1175FD30–FD60

Security Fire Doors in Cheshire

We supply and fit security fire doors throughout Cheshire, including Warrington, Chester and Crewe, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,600 per single doorset in Cheshire, supplied & fitted, ex VAT

Dark grey steel security door with multipoint lock in a commercial corridor

Our Cheshire supply and fit service

We supply and fit security fire doors across Cheshire, including Warrington, Chester and Crewe. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Regulations for security fire doors in Cheshire

In Cheshire, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do security fire doors cost in Cheshire?

Expect roughly £1,600–£3,500 per single doorset for security fire doors, fitted, ex VAT. Your Cheshire quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where security fire doors are used in Cheshire

Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.

  • Flat entrance doors
  • Pharmacies and cash rooms
  • IT and comms rooms
  • Plant rooms with valuable equipment

What you get with each doorset

SecurityPAS 24:2022 or LPS 1175 ratings
FireFD30 to FD60, steel or timber
LockingMultipoint and high-security locks tested with the doorset
Typical useFlat entrances, plant rooms, pharmacies, cash and IT rooms
EvidenceFire and security certification for the same configuration
Elevation drawing of security fire doors

See the full specification and options for Security Fire Doors

How it works in Cheshire

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Can you fit just one door?

Yes — from a single door to a full building.

Which rules apply in Cheshire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Does my insurer need a specific rating?

Often for commercial premises. Tell us the grade and we'll propose a doorset certified to it.

Towns in Cheshire we cover for security fire doors

Security Fire Doors in neighbouring areas

Other fire doors in Cheshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.