Getting FD90 and FD120 fire doors fitted in Warrington
If your fire risk assessment in Warrington has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in WA1 are free and quotes are fixed and itemised.
Warrington is one of the main towns we cover in Cheshire; tell us your dates and we'll arrange a survey.
Regulations for FD90 and FD120 fire doors in Cheshire
In Warrington, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Warrington?
Our guide price for FD90 and FD120 fire doors in Warrington is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are used in Warrington
Typical uses for FD90 and FD120 fire doors in Warrington include high fire-load stores and separating walls with long ratings.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Warrington
Do you cover Warrington?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Warrington and the rest of Cheshire, including WA1 and nearby Great Sankey.
Which rules do FD90 and FD120 fire doors in Warrington need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Warrington.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
FD90 & FD120 Doorsets near Warrington
- Great Sankey (2 miles)
- Newton-le-Willows (4 miles)
- Golborne (6 miles)
- Widnes (7 miles)
- Ashton-in-Makerfield (7 miles)
- Runcorn (7 miles)
More doorsets for Warrington
- Double & Leaf-and-a-Half Fire Doors in Warrington
- Commercial & Office Fire Doors in Warrington
- FD30S Smoke Control Doorsets in Warrington
- Composite Fire Doors in Warrington
- School & Healthcare Fire Doors in Warrington
- Fire Door Replacement in Warrington
- Flat Entrance Fire Doors in Warrington
- Security Fire Doors in Warrington
- FD90 & FD120 Doorsets across Cheshire
- All fire doors in Warrington