Certified FD30S fire doors for Cheshire
Across Cheshire we handle FD30S fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
Which rules apply in Cheshire?
New and replacement fire doors in Cheshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30S fire doors cost in Cheshire?
Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Cheshire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD30S fire doors are needed
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Protected stairways
- Cross-corridor doors
- Integral garage doors
- Lobby doors in blocks of flats
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Cheshire property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD30S fire doors in Cheshire: questions
Do you cover the whole of Cheshire?
Yes. We survey, supply and fit FD30S fire doors across Cheshire, including Warrington, Chester and Crewe.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
How quickly can you survey in Cheshire?
We arrange surveys around your access needs and, where possible, combine visits with other work in Cheshire. Tell us your preferred dates when you enquire.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
Towns in Cheshire we cover for FD30S fire doors
- Chester
- Congleton
- Crewe
- Ellesmere Port
- Great Sankey
- Macclesfield
- Northwich
- Runcorn
- Warrington
- Widnes
- Wilmslow
- Winsford
FD30S Smoke Control Doorsets in neighbouring areas
Other fire doors in Cheshire
- FD30 Fire Doorsets in Cheshire
- FD60 Fire Doorsets in Cheshire
- FD90 & FD120 Doorsets in Cheshire
- Flat Entrance Fire Doors in Cheshire
- Communal & Corridor Fire Doors in Cheshire
- Stairwell & Escape Route Doors in Cheshire
- HMO Fire Doors in Cheshire
- Fire Doors for Homes in Cheshire
- Riser & Service Cupboard Doors in Cheshire
- Commercial & Office Fire Doors in Cheshire
- School & Healthcare Fire Doors in Cheshire
- Timber Fire Doorsets in Cheshire
- Composite Fire Doors in Cheshire
- Steel Fire Doors in Cheshire
- Glazed Fire Doors in Cheshire
- Double & Leaf-and-a-Half Fire Doors in Cheshire
- Fire-Rated Screens & Fanlights in Cheshire
- Acoustic Fire Doors in Cheshire
- Security Fire Doors in Cheshire
- Fire Exit Doors in Cheshire
- Fire Door Ironmongery & Closers in Cheshire
- Fire Door Replacement in Cheshire
- Fire Door Supply & Fit in Cheshire
- All fire doors in Cheshire