Certified FD90 and FD120 fire doors for Crewe
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Crewe and the rest of Cheshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover CW1 and the surrounding area, including Winsford. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Crewe
In Crewe, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Crewe?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Crewe quote is fixed after survey and itemised door by door.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Crewe
In Crewe, FD90 and FD120 fire doors are typically needed in high fire-load stores and separating walls with long ratings.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Crewe property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD90 and FD120 fire doors in Crewe: questions
Is the survey in Crewe free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD90 and FD120 fire doors in Crewe need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Crewe?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Winsford (7 miles)
- Kidsgrove (9 miles)
- Congleton (11 miles)
- Newcastle-under-Lyme (11 miles)
- Northwich (12 miles)
- Stoke-on-Trent (12 miles)
Also available in Crewe
- Fire Door Ironmongery & Closers in Crewe
- Commercial & Office Fire Doors in Crewe
- Fire-Rated Screens & Fanlights in Crewe
- School & Healthcare Fire Doors in Crewe
- Timber Fire Doorsets in Crewe
- Stairwell & Escape Route Doors in Crewe
- Security Fire Doors in Crewe
- Fire Door Supply & Fit in Crewe
- FD90 & FD120 Doorsets across Cheshire
- All fire doors in Crewe