Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Somerset

We supply and fit FD60 fire doors throughout Somerset, including Bath, Weston-super-Mare and Taunton, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Somerset, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 Fire Doorsets for Somerset buildings

We supply and fit FD60 fire doors across Somerset, including Bath, Weston-super-Mare and Taunton. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Regulations for FD60 fire doors in Somerset

Because Somerset is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Cost of FD60 fire doors in Somerset

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Somerset are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Buildings that need FD60 fire doors

Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

FD60 fire doors in Somerset: questions

Do you cover the whole of Somerset?

Yes. We survey, supply and fit FD60 fire doors across Somerset, including Bath, Weston-super-Mare and Taunton.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do FD60 doors need different closers?

Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.

Towns in Somerset we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Somerset

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.