FD30 Fire Doorsets for Somerset buildings
Throughout Somerset, including Bath, Weston-super-Mare and Taunton, we survey, quote and fit FD30 doorsets for flats, offices, HMOs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.
What the law says in Somerset
Fire doors in Somerset sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD30 fire doors cost in Somerset?
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Somerset are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are needed
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD30 fire doors in Somerset: questions
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is FD30 the same as E30?
Broadly, yes. FD30 comes from the British test (BS 476-22); E30 is the European classification from BS EN 1634-1. Both mean 30 minutes of integrity. EI30 adds insulation, which some locations and glazed doors need.
Towns in Somerset we cover for FD30 fire doors
FD30 Fire Doorsets in neighbouring areas
Other fire doors in Somerset
- FD30S Smoke Control Doorsets in Somerset
- FD60 Fire Doorsets in Somerset
- FD90 & FD120 Doorsets in Somerset
- Flat Entrance Fire Doors in Somerset
- Communal & Corridor Fire Doors in Somerset
- Stairwell & Escape Route Doors in Somerset
- HMO Fire Doors in Somerset
- Fire Doors for Homes in Somerset
- Riser & Service Cupboard Doors in Somerset
- Commercial & Office Fire Doors in Somerset
- School & Healthcare Fire Doors in Somerset
- Timber Fire Doorsets in Somerset
- Composite Fire Doors in Somerset
- Steel Fire Doors in Somerset
- Glazed Fire Doors in Somerset
- Double & Leaf-and-a-Half Fire Doors in Somerset
- Fire-Rated Screens & Fanlights in Somerset
- Acoustic Fire Doors in Somerset
- Security Fire Doors in Somerset
- Fire Exit Doors in Somerset
- Fire Door Ironmongery & Closers in Somerset
- Fire Door Replacement in Somerset
- Fire Door Supply & Fit in Somerset
- All fire doors in Somerset