Certified FD60 fire doors for Mid Glamorgan
Across Mid Glamorgan we handle FD60 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
Fire door rules in Mid Glamorgan
In Mid Glamorgan the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
FD60 fire doors prices in Mid Glamorgan
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Mid Glamorgan quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are needed
The valleys towns of Mid Glamorgan have extensive terraced housing, schools and public buildings, with Bridgend adding industrial estates.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Mid Glamorgan
Can you fit just one door?
Yes — from a single door to a full building.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Towns in Mid Glamorgan we cover for FD60 fire doors
FD60 Fire Doorsets in neighbouring areas
Other fire doors in Mid Glamorgan
- FD30 Fire Doorsets in Mid Glamorgan
- FD30S Smoke Control Doorsets in Mid Glamorgan
- FD90 & FD120 Doorsets in Mid Glamorgan
- Flat Entrance Fire Doors in Mid Glamorgan
- Communal & Corridor Fire Doors in Mid Glamorgan
- Stairwell & Escape Route Doors in Mid Glamorgan
- HMO Fire Doors in Mid Glamorgan
- Fire Doors for Homes in Mid Glamorgan
- Riser & Service Cupboard Doors in Mid Glamorgan
- Commercial & Office Fire Doors in Mid Glamorgan
- School & Healthcare Fire Doors in Mid Glamorgan
- Timber Fire Doorsets in Mid Glamorgan
- Composite Fire Doors in Mid Glamorgan
- Steel Fire Doors in Mid Glamorgan
- Glazed Fire Doors in Mid Glamorgan
- Double & Leaf-and-a-Half Fire Doors in Mid Glamorgan
- Fire-Rated Screens & Fanlights in Mid Glamorgan
- Acoustic Fire Doors in Mid Glamorgan
- Security Fire Doors in Mid Glamorgan
- Fire Exit Doors in Mid Glamorgan
- Fire Door Ironmongery & Closers in Mid Glamorgan
- Fire Door Replacement in Mid Glamorgan
- Fire Door Supply & Fit in Mid Glamorgan
- All fire doors in Mid Glamorgan