Getting FD60 fire doors fitted in Nailsea
Need FD60 fire doors in Nailsea? We supply and fit complete certified doorsets across Somerset, starting with a free measure survey in and around BS48. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Nailsea is about 17 miles from Bath. Wherever your building is in BS48, we arrange survey and fitting dates around access and occupancy.
What the law says in Nailsea
Fire doors in Nailsea sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD60 fire doors cost in Nailsea?
Guide prices for FD60 fire doors in Nailsea run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Nailsea
Typical uses for FD60 fire doors in Nailsea include higher-risk stores and plant and boiler rooms.
Somerset includes Bath's Georgian conversions and student housing, Weston-super-Mare's hotels and Taunton and Yeovil's town centres.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Nailsea
- Tell us about the doors — photos help
- Free measure survey at your Nailsea property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD60 fire doors in Nailsea
Do you work for landlords and managing agents in Nailsea?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
What does a Nailsea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Nailsea?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Portishead (4 miles)
- Clevedon (4 miles)
- Bristol (7 miles)
- Kingswood (11 miles)
- Weston-super-Mare (11 miles)
- Mangotsfield (12 miles)
Other products in Nailsea
- Stairwell & Escape Route Doors in Nailsea
- Timber Fire Doorsets in Nailsea
- Composite Fire Doors in Nailsea
- Riser & Service Cupboard Doors in Nailsea
- Fire Door Replacement in Nailsea
- Commercial & Office Fire Doors in Nailsea
- HMO Fire Doors in Nailsea
- Fire-Rated Screens & Fanlights in Nailsea
- FD60 Fire Doorsets across Somerset
- All fire doors in Nailsea