FD60 fire doors in Gloucestershire: how we work
We supply and fit FD60 fire doors across Gloucestershire, including Gloucester, Cheltenham and Stroud. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
Regulations for FD60 fire doors in Gloucestershire
Fire doors in Gloucestershire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Gloucestershire
Our guide price for FD60 fire doors in Gloucestershire is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Gloucestershire
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Gloucestershire property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Which rules apply in Gloucestershire?
Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you cover the whole of Gloucestershire?
Yes. We survey, supply and fit FD60 fire doors across Gloucestershire, including Gloucester, Cheltenham and Stroud.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Towns in Gloucestershire we cover for FD60 fire doors
FD60 Fire Doorsets in neighbouring areas
Other fire doors in Gloucestershire
- FD30 Fire Doorsets in Gloucestershire
- FD30S Smoke Control Doorsets in Gloucestershire
- FD90 & FD120 Doorsets in Gloucestershire
- Flat Entrance Fire Doors in Gloucestershire
- Communal & Corridor Fire Doors in Gloucestershire
- Stairwell & Escape Route Doors in Gloucestershire
- HMO Fire Doors in Gloucestershire
- Fire Doors for Homes in Gloucestershire
- Riser & Service Cupboard Doors in Gloucestershire
- Commercial & Office Fire Doors in Gloucestershire
- School & Healthcare Fire Doors in Gloucestershire
- Timber Fire Doorsets in Gloucestershire
- Composite Fire Doors in Gloucestershire
- Steel Fire Doors in Gloucestershire
- Glazed Fire Doors in Gloucestershire
- Double & Leaf-and-a-Half Fire Doors in Gloucestershire
- Fire-Rated Screens & Fanlights in Gloucestershire
- Acoustic Fire Doors in Gloucestershire
- Security Fire Doors in Gloucestershire
- Fire Exit Doors in Gloucestershire
- Fire Door Ironmongery & Closers in Gloucestershire
- Fire Door Replacement in Gloucestershire
- Fire Door Supply & Fit in Gloucestershire
- All fire doors in Gloucestershire