Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Bristol

We supply and fit FD60 fire doors throughout Bristol, including Bristol, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,050 per single doorset in Bristol, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

FD60 fire doors in Bristol: how we work

Our Bristol service covers FD60 fire doors for flats, HMOs, workplaces, schools and homes, including Bristol.

What the law says in Bristol

New and replacement fire doors in Bristol are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Guide prices in Bristol

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Bristol are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.

Buildings that need FD60 fire doors

Bristol has a large stock of converted Victorian houses, student accommodation and post-war council blocks, alongside new city-centre apartments.

  • Compartment walls
  • Stair cores in taller blocks
  • Plant and boiler rooms
  • Higher-risk stores

What's in the doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

How it works in Bristol

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Bristol

Can you fit just one door?

Yes — from a single door to a full building.

Do you cover the whole of Bristol?

Yes. We survey, supply and fit FD60 fire doors across Bristol, including Bristol.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

Towns in Bristol we cover for FD60 fire doors

FD60 Fire Doorsets in neighbouring areas

Other fire doors in Bristol

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.