FD30S Smoke Control Doorsets for Worthing buildings
We fit FD30S smoke control doorsets for flats, stairs and corridors in Worthing and the rest of West Sussex. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Worthing is about 22 miles from Crawley; we cover both, along with Portslade, Littlehampton and Hove.
Regulations for FD30S fire doors in West Sussex
In Worthing, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD30S fire doors in West Sussex
Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Worthing, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD30S fire doors
Cross-corridor doors and integral garage doors are among the most common settings for FD30S fire doors, in Worthing as elsewhere.
West Sussex combines Crawley's offices and Gatwick-related industry with coastal towns' care homes, hotels and converted houses.
- Cross-corridor doors
- Integral garage doors
- Lobby doors in blocks of flats
- Protected stairways
What you get with each doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
How it works in Worthing
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD30S fire doors in Worthing
Do you cover Worthing?
Yes. We survey, supply and fit FD30S fire doors throughout Worthing and the rest of West Sussex, including BN11 and nearby Portslade.
Which rules do FD30S fire doors in Worthing need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Worthing?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Also covering towns near Worthing
- Portslade (7 miles)
- Littlehampton (7 miles)
- Hove (9 miles)
- Brighton (11 miles)
- Bognor Regis (14 miles)
- Rottingdean (14 miles)
Other products in Worthing
- HMO Fire Doors in Worthing
- FD30 Fire Doorsets in Worthing
- FD90 & FD120 Doorsets in Worthing
- Steel Fire Doors in Worthing
- Flat Entrance Fire Doors in Worthing
- Acoustic Fire Doors in Worthing
- Double & Leaf-and-a-Half Fire Doors in Worthing
- Fire Door Supply & Fit in Worthing
- FD30S Smoke Control Doorsets across West Sussex
- All fire doors in Worthing