Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30–FD60VeneerBespoke sizes

Timber Fire Doorsets in West Sussex

We supply and fit timber fire doors throughout West Sussex, including Crawley, Worthing and Bognor Regis, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in West Sussex, supplied & fitted, ex VAT

Close-up of veneered timber fire door edge, hardwood lipping and hinge

Certified timber fire doors for West Sussex

Our West Sussex service covers timber fire doors for flats, HMOs, workplaces, schools and homes, including Crawley, Worthing and Bognor Regis.

Which rules apply in West Sussex?

New and replacement fire doors in West Sussex are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Guide prices in West Sussex

Our guide price for timber fire doors in West Sussex is £750 to £1,600 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Typical uses in West Sussex

West Sussex combines Crawley's offices and Gatwick-related industry with coastal towns' care homes, hotels and converted houses.

  • Flats and HMOs
  • Offices and hotels
  • Schools and care homes
  • Period buildings needing bespoke sizes

Doorset specification

RatingsFD30, FD30S, FD60, FD60S
FacesPrimed, pre-painted, laminate, oak, ash, walnut and other veneers
FramesHardwood or engineered frames to match
SizesStandard and made-to-measure
Code of practiceBS 8214:2026
Elevation drawing of timber fire doorsets

See the full specification and options for Timber Fire Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in West Sussex

Can you fit just one door?

Yes — from a single door to a full building.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Can a timber fire door be trimmed on site?

Only within the limits the manufacturer's evidence allows, usually a few millimetres. We prefer made-to-measure doorsets so no trimming is needed.

Towns in West Sussex we cover for timber fire doors

Timber Fire Doorsets in neighbouring areas

Other fire doors in West Sussex

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.