Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in West Sussex

We supply and fit FD30 fire doors throughout West Sussex, including Crawley, Worthing and Bognor Regis, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in West Sussex, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

FD30 fire doors in West Sussex: how we work

Throughout West Sussex, including Crawley, Worthing and Bognor Regis, we survey, quote and fit FD30 doorsets for flats, offices, HMOs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.

What the law says in West Sussex

New and replacement fire doors in West Sussex are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

What do FD30 fire doors cost in West Sussex?

Guide prices for FD30 fire doors in West Sussex run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Typical uses in West Sussex

West Sussex combines Crawley's offices and Gatwick-related industry with coastal towns' care homes, hotels and converted houses.

  • Offices and retail back-of-house
  • HMO bedrooms and kitchens
  • Hotel corridors
  • Plant rooms and stores

What's in the doorset

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

FD30 fire doors in West Sussex: questions

Can you fit just one door?

Yes — from a single door to a full building.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Which rules apply in West Sussex?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Does an FD30 door need a self-closer?

Almost always. Fire doors only work closed, so they need a self-closing device unless they are cupboard or riser doors kept locked shut.

Towns in West Sussex we cover for FD30 fire doors

FD30 Fire Doorsets in neighbouring areas

Other fire doors in West Sussex

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.