Getting FD30S fire doors fitted in Margate
If your fire risk assessment in Margate has flagged doors to replace, we can schedule, quote and fit FD30S smoke control doorsets for flats, stairs and corridors to match its recommendations. Surveys in CT9 are free and quotes are fixed and itemised.
Margate is about 39 miles from Maidstone. Wherever your building is in CT9, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Margate?
In Margate, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD30S fire doors prices in Margate
Our guide price for FD30S fire doors in Margate is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD30S fire doors are needed
Wherever they are in Margate, FD30S fire doors are most often specified for cross-corridor doors and protected stairways.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Cross-corridor doors
- Protected stairways
- Lobby doors in blocks of flats
- Integral garage doors
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD30S fire doors in Margate: questions
Can you fit just one door in Margate?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Kent.
Is the survey in Margate free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Margate?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Neighbouring areas
- Broadstairs (3 miles)
- Ramsgate (4 miles)
- Deal (11 miles)
- Herne Bay (11 miles)
- Canterbury (15 miles)
- Whitstable (16 miles)
Other fire doors in Margate
- Double & Leaf-and-a-Half Fire Doors in Margate
- Fire Door Supply & Fit in Margate
- Riser & Service Cupboard Doors in Margate
- FD90 & FD120 Doorsets in Margate
- FD30 Fire Doorsets in Margate
- Fire-Rated Screens & Fanlights in Margate
- HMO Fire Doors in Margate
- Steel Fire Doors in Margate
- FD30S Smoke Control Doorsets across Kent
- All fire doors in Margate