Getting FD30S fire doors fitted in Ramsgate
We cover Ramsgate and nearby Broadstairs for FD30S fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Our Kent coverage includes Ramsgate and its neighbours Broadstairs, Margate and Deal; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Ramsgate?
New and replacement fire doors in Ramsgate are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of FD30S fire doors in Kent
Our guide price for FD30S fire doors in Ramsgate is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD30S fire doors
Typical uses for FD30S fire doors in Ramsgate include cross-corridor doors and integral garage doors.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Cross-corridor doors
- Integral garage doors
- Protected stairways
- Lobby doors in blocks of flats
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
How quickly can you survey in Ramsgate?
We arrange surveys around your access needs and, where possible, combine Ramsgate visits with other work in Kent. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Ramsgate?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Ramsgate quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
FD30S Smoke Control Doorsets near Ramsgate
- Broadstairs (2 miles)
- Margate (4 miles)
- Deal (8 miles)
- Herne Bay (13 miles)
- Canterbury (15 miles)
- Dover (15 miles)
Other products in Ramsgate
- FD30 Fire Doorsets in Ramsgate
- Fire Exit Doors in Ramsgate
- FD60 Fire Doorsets in Ramsgate
- Commercial & Office Fire Doors in Ramsgate
- Riser & Service Cupboard Doors in Ramsgate
- Flat Entrance Fire Doors in Ramsgate
- Glazed Fire Doors in Ramsgate
- Fire Door Ironmongery & Closers in Ramsgate
- FD30S Smoke Control Doorsets across Kent
- All fire doors in Ramsgate