Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Gravesend

We supply and fit FD30S fire doors in Gravesend (DA11) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £800 per single doorset in Gravesend, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S fire doors in Gravesend: how we work

Getting FD30S fire doors right in Gravesend means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.

Gravesend is about 14 miles from Maidstone; we cover both, along with Grays, Strood and South Ockendon.

Which rules apply in Gravesend?

In Gravesend, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Guide prices in Gravesend

Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Gravesend quote is fixed after survey and itemised door by door.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD30S fire doors are needed

Protected stairways and lobby doors in blocks of flats are among the most common settings for FD30S fire doors, in Gravesend as elsewhere.

Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.

  • Protected stairways
  • Lobby doors in blocks of flats
  • Integral garage doors
  • Cross-corridor doors

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Which rules do FD30S fire doors in Gravesend need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

How quickly can you survey in Gravesend?

We arrange surveys around your access needs and, where possible, combine Gravesend visits with other work in Kent. Tell us your preferred dates when you enquire.

Do you work for landlords and managing agents in Gravesend?

Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.

Is a threshold seal needed?

It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.

FD30S Smoke Control Doorsets near Gravesend

Other fire doors in Gravesend

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.