Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Felling

We supply and fit communal fire doors in Felling (NE10) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £1,600 per pair in Felling, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Communal fire doors in Felling: how we work

If your fire risk assessment in Felling has flagged doors to replace, we can schedule, quote and fit communal corridor and lobby fire doors to match its recommendations. Surveys in NE10 are free and quotes are fixed and itemised.

Felling is about 2 miles from Newcastle upon Tyne; we cover both, along with Gateshead, Newcastle upon Tyne and Hebburn.

Regulations for communal fire doors in Tyne and Wear

In Felling, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Guide prices in Felling

Our guide price for communal fire doors in Felling is £1,600 to £3,200 per pair including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need communal fire doors

Student accommodation and hotels are among the most common settings for communal fire doors, in Felling as elsewhere.

Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.

  • Student accommodation
  • Hotels
  • Sheltered and supported housing
  • Blocks of flats

What's in the doorset

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

How it works in Felling

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Communal fire doors in Felling: questions

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Felling.

Can you fit just one door in Felling?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Tyne and Wear.

Will I get certificates for the doors fitted in Felling?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you replace doors while the building is occupied?

Yes. We phase work so escape routes are maintained, and plan each door to be removed and replaced the same day. If that isn't possible, the opening is made secure and we tell you in advance.

Neighbouring areas

Other products in Felling

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.