Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Northumberland

We supply and fit communal fire doors throughout Northumberland, including Blyth, Cramlington and Ashington, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,600 per pair in Northumberland, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Getting communal fire doors fitted in Northumberland

We supply and fit communal fire doors across Northumberland, including Blyth, Cramlington and Ashington. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Which rules apply in Northumberland?

Because Northumberland is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

Guide prices in Northumberland

Our guide for communal fire doors is £1,600–£3,200 per pair fitted, ex VAT. Quotes for Northumberland are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where communal fire doors are needed

Northumberland's main towns — Blyth, Cramlington, Ashington — mix new estates and industry with rural schools and care homes.

  • Blocks of flats
  • Sheltered and supported housing
  • Student accommodation
  • Hotels

Doorset specification

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

Four steps to compliant doors

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Common questions in Northumberland

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Can communal fire doors be held open?

Only with an approved hold-open or free-swing device linked to the fire alarm. Wedges and hooks are not acceptable.

Towns in Northumberland we cover for communal fire doors

Communal & Corridor Fire Doors in neighbouring areas

Other fire doors in Northumberland

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.