Getting FD90 and FD120 fire doors fitted in Huddersfield
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Huddersfield, West Yorkshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Huddersfield or on its edges towards Brighouse, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD90 and FD120 fire doors in West Yorkshire
Because Huddersfield is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD90 and FD120 fire doors prices in Huddersfield
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Huddersfield quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Typical uses for FD90 and FD120 fire doors in Huddersfield include separating walls with long ratings and generator rooms.
Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Huddersfield: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Huddersfield.
Which rules do FD90 and FD120 fire doors in Huddersfield need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Huddersfield?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Brighouse (4 miles)
- Halifax (6 miles)
- Cleckheaton (6 miles)
- Dewsbury (7 miles)
- Batley (7 miles)
- Ossett (9 miles)
Other products in Huddersfield
- Fire Doors for Homes in Huddersfield
- Steel Fire Doors in Huddersfield
- Fire Door Replacement in Huddersfield
- Fire Door Supply & Fit in Huddersfield
- Composite Fire Doors in Huddersfield
- Glazed Fire Doors in Huddersfield
- HMO Fire Doors in Huddersfield
- Commercial & Office Fire Doors in Huddersfield
- FD90 & FD120 Doorsets across West Yorkshire
- All fire doors in Huddersfield