Getting FD90 and FD120 fire doors fitted in Castleford
Getting FD90 and FD120 fire doors right in Castleford means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Castleford surveys with other visits in West Yorkshire, such as Pontefract and Lofthouse, which helps keep survey dates flexible.
What the law says in Castleford
In Castleford, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Castleford
Guide prices for FD90 and FD120 fire doors in Castleford run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
In Castleford, FD90 and FD120 fire doors are typically needed in high fire-load stores and separating walls with long ratings.
Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
- Generator rooms
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Castleford
Is the survey in Castleford free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Castleford?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you fit just one door in Castleford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in West Yorkshire.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Nearby towns we cover
- Pontefract (3 miles)
- Lofthouse (6 miles)
- Wakefield (6 miles)
- Leeds (9 miles)
- Ossett (9 miles)
- Morley (10 miles)
Other products in Castleford
- FD30 Fire Doorsets in Castleford
- Acoustic Fire Doors in Castleford
- Composite Fire Doors in Castleford
- School & Healthcare Fire Doors in Castleford
- Commercial & Office Fire Doors in Castleford
- Riser & Service Cupboard Doors in Castleford
- Timber Fire Doorsets in Castleford
- Fire Door Replacement in Castleford
- FD90 & FD120 Doorsets across West Yorkshire
- All fire doors in Castleford