FD90 and FD120 fire doors in Wakefield: how we work
We cover Wakefield and nearby Lofthouse for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover WF1 and the surrounding area, including Lofthouse. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Wakefield?
Fire doors in Wakefield sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Wakefield?
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Wakefield, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Wakefield include high fire-load stores and transformer and switch rooms.
Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Wakefield: questions
Can you work around tenants or staff in Wakefield?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Wakefield?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Wakefield free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
FD90 & FD120 Doorsets near Wakefield
- Lofthouse (3 miles)
- Ossett (3 miles)
- Dewsbury (6 miles)
- Morley (6 miles)
- Batley (6 miles)
- Castleford (6 miles)
Other products in Wakefield
- Fire Door Replacement in Wakefield
- FD60 Fire Doorsets in Wakefield
- Fire Doors for Homes in Wakefield
- Flat Entrance Fire Doors in Wakefield
- Timber Fire Doorsets in Wakefield
- Riser & Service Cupboard Doors in Wakefield
- Fire-Rated Screens & Fanlights in Wakefield
- FD30S Smoke Control Doorsets in Wakefield
- FD90 & FD120 Doorsets across West Yorkshire
- All fire doors in Wakefield