Our Dewsbury supply and fit service
If your fire risk assessment in Dewsbury has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in WF12 are free and quotes are fixed and itemised.
Dewsbury is about 8 miles from Leeds. Wherever your building is in WF12, we arrange survey and fitting dates around access and occupancy.
Which rules apply in Dewsbury?
In Dewsbury, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD90 and FD120 fire doors prices in Dewsbury
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Dewsbury are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD90 and FD120 fire doors
Wherever they are in Dewsbury, FD90 and FD120 fire doors are most often specified for generator rooms and transformer and switch rooms.
Leeds and Bradford lead West Yorkshire's demand with city-centre apartments, student housing and converted mills across the Pennine towns.
- Generator rooms
- Transformer and switch rooms
- Separating walls with long ratings
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Dewsbury
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Dewsbury.
Is the survey in Dewsbury free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Dewsbury?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Dewsbury and the rest of West Yorkshire, including WF12 and nearby Batley.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Batley (1 mile)
- Ossett (2 miles)
- Morley (4 miles)
- Cleckheaton (4 miles)
- Wakefield (6 miles)
- Lofthouse (6 miles)
Other fire doors in Dewsbury
- Double & Leaf-and-a-Half Fire Doors in Dewsbury
- Fire Door Ironmongery & Closers in Dewsbury
- Composite Fire Doors in Dewsbury
- Fire Exit Doors in Dewsbury
- Fire-Rated Screens & Fanlights in Dewsbury
- FD30S Smoke Control Doorsets in Dewsbury
- FD60 Fire Doorsets in Dewsbury
- Communal & Corridor Fire Doors in Dewsbury
- FD90 & FD120 Doorsets across West Yorkshire
- All fire doors in Dewsbury