Certified FD90 and FD120 fire doors for Newcastle-under-Lyme
Need FD90 and FD120 fire doors in Newcastle-under-Lyme? We supply and fit complete certified doorsets across Staffordshire, starting with a free measure survey in and around ST5. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Newcastle-under-Lyme is about 2 miles from Stoke-on-Trent. Wherever your building is in ST5, we arrange survey and fitting dates around access and occupancy.
Regulations for FD90 and FD120 fire doors in Staffordshire
In Newcastle-under-Lyme, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Newcastle-under-Lyme?
Guide prices for FD90 and FD120 fire doors in Newcastle-under-Lyme run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are used in Newcastle-under-Lyme
In Newcastle-under-Lyme, FD90 and FD120 fire doors are typically needed in transformer and switch rooms and separating walls with long ratings.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Transformer and switch rooms
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Newcastle-under-Lyme
What does a Newcastle-under-Lyme quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD90 and FD120 fire doors in Newcastle-under-Lyme need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you fit just one door in Newcastle-under-Lyme?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Staffordshire.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Stoke-on-Trent (2 miles)
- Longton (4 miles)
- Kidsgrove (6 miles)
- Crewe (11 miles)
- Congleton (11 miles)
- Stafford (14 miles)
More doorsets for Newcastle-under-Lyme
- Fire-Rated Screens & Fanlights in Newcastle-under-Lyme
- Communal & Corridor Fire Doors in Newcastle-under-Lyme
- Flat Entrance Fire Doors in Newcastle-under-Lyme
- HMO Fire Doors in Newcastle-under-Lyme
- Riser & Service Cupboard Doors in Newcastle-under-Lyme
- Steel Fire Doors in Newcastle-under-Lyme
- Double & Leaf-and-a-Half Fire Doors in Newcastle-under-Lyme
- Fire Doors for Homes in Newcastle-under-Lyme
- FD90 & FD120 Doorsets across Staffordshire
- All fire doors in Newcastle-under-Lyme