Getting FD90 and FD120 fire doors fitted in Burntwood
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Burntwood, Staffordshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover WS7 and the surrounding area, including Lichfield. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Burntwood
In Burntwood, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Burntwood?
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Burntwood, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Burntwood
Wherever they are in Burntwood, FD90 and FD120 fire doors are most often specified for high fire-load stores and separating walls with long ratings.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Is the survey in Burntwood free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you work for landlords and managing agents in Burntwood?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Burntwood.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Lichfield (4 miles)
- Cannock (4 miles)
- Aldridge (5 miles)
- Bloxwich (6 miles)
- Rugeley (6 miles)
- Walsall (7 miles)
Other products in Burntwood
- Commercial & Office Fire Doors in Burntwood
- FD30S Smoke Control Doorsets in Burntwood
- HMO Fire Doors in Burntwood
- FD30 Fire Doorsets in Burntwood
- Stairwell & Escape Route Doors in Burntwood
- Fire-Rated Screens & Fanlights in Burntwood
- Steel Fire Doors in Burntwood
- Double & Leaf-and-a-Half Fire Doors in Burntwood
- FD90 & FD120 Doorsets across Staffordshire
- All fire doors in Burntwood